In order to install this module, first run

perl Makefile.PL

If this command says that some prerequisite modules are not present,
you need to install these modules; each required one should
be available from CPAN at http://www.cpan.org/

make
make test
make install

This module depends on:

	Perl 5.005
	Class::MethodMaker 1.00	or later, available from CPAN; http://www.cpan.org/
	GnuPG			available from http://www.gnupg.org/


-----------------------------------------------------------------------
NAME
    GnuPG::Interface - Perl interface to GnuPG

SYNOPSIS
      # A simple example
      use IO::Handle;
      use GnuPG::Interface;
      
      # settting up the situation
      my $gnupg = GnuPG::Interface->new();
      $gnupg->options->hash_init( armor   => 1,
                                  homedir => '/home/foobar' );

      # Note you can set the recipients even if you aren't encrypting!
      $gnupg->options->push_recipients( 'ftobin@uiuc.edu' );
      $gnupg->options->meta_interactive( 0 );

      # how we create some handles to interact with GnuPG
      my $input   = IO::Handle->new();
      my $output  = IO::Handle->new();
      my $handles = GnuPG::Handles->new( stdin  => $input,
                                         stdout => $output );

      # Now we'll go about encrypting with the options already set
      my @plaintext = ( 'foobar' );
      my $pid = $gnupg->encrypt( handles => $handles );
      
      # Now we write to the input of GnuPG
      print $input @plaintext;
      close $input;

      # now we read the output
      my @ciphertext = <$output>;
      close $output;

      waitpid $pid, 0;

DESCRIPTION
    GnuPG::Interface and its associated modules are designed to provide an object-
    oriented method for interacting with GnuPG, being able to perform functions such as
    but not limited to encrypting, signing, decryption, verification, and key-listing
    parsing.

  How Data Member Accessor Methods are Created

    Each module in the GnuPG::Interface bundle relies on Class::MethodMaker to generate
    the get/set methods used to set the object's data members. *This is very important
    to realize.* This means that any data member which is a list has special methods
    assigned to it for pushing, popping, and clearing the list.

  Understanding Bidirectional Communication

    It is also imperative to realize that this package uses interprocess communication
    methods similar to those used in the IPC::Open3 manpage and the section on
    "Bidirectional Communication with Another Process" in the perlipc manpage, and that
    users of this package need to understand how to use this method because this package
    does not abstract these methods for the user greatly. This package is not designed
    to abstract this away entirely (partly for security purposes), but rather to simply
    help create 'proper', clean calls to GnuPG, and to implement key-listing parsing.
    Please see the section on "Bidirectional Communication with Another Process" in the
    perlipc manpage to learn how to deal with these methods.

    Using this package to do message processing generally invovlves creating a
    GnuPG::Interface object, creating a GnuPG::Handles object, setting some options in
    its options data member, and then calling a method which invokes GnuPG, such as
    clearsign. One then interacts with with the handles appropriately, as described in
    the section on "Bidirectional Communication with Another Process" in the perlipc
    manpage.

OBJECT METHODS
  Initialization Methods

    new( *%initialization_args* )
        This methods creates a new object. The optional arguments are initialization of
        data members; the initialization is done in a manner according to the method
        created as described in the section on "new_hash_init" in the Class::MethodMaker
        manpage.

    hash_init( *%args* ).
        This methods work as described in the section on "new_hash_init" in the
        Class::MethodMaker manpage.

  Object Methods which use a GnuPG::Handles Object

    list_public_keys( % )
    list_sigs( % )
    list_secret_keys( % )
    encrypt( % )
    encrypt_symmetrically( % )
    sign( % )
    clearsign( % )
    detach_sign( % )
    sign_and_encrypt( % )
    decrypt( % )
    verify( % )
    import_keys( % )
    export_keys( % )
    recv_keys( % )
    send_keys( % )
        These methods each correspond directly to or are very similar to a GnuPG command
        described in the gpg manpage. Each of these methods takes a hash, which
        currently must contain a key of handles which has the value of a GnuPG::Handles
        object. Another optional key is command_args which should have the value of an
        array reference; these arguments will be passed to GnuPG as command arguments.
        These command arguments are used for such things as determining the keys to list
        in the export_keys method. *Please note that GnuPG command arguments are not the
        same as GnuPG options*. To understand what are options and what are command
        arguments please read the section on "COMMANDS" in the gpg manpage and the
        section on "OPTIONS" in the gpg manpage.

        Each of these calls returns the PID for the resulting GnuPG process. One can use
        this PID in a `waitpid' call instead of a `wait' call if more precise process
        reaping is needed.

        These methods will attach the handles specified in the handles object to the
        running GnuPG object, so that bidirectional communication can be established.
        That is, the optionally-defined stdin, stdout, stderr, status, logger, and
        passphrase handles will be attached to GnuPG's input, output, standard error,
        the handle created by setting status-fd, the handle created by setting logger-
        fd, and the handle created by setting passphrase-fd respectively. This tying of
        handles of similar to the process done in *IPC::Open3*.

        If you want the GnuPG process to read or write directly to an already-opened
        filehandle, you cannot do this via the normal *IPC::Open3* mechanisms. In order
        to accomplish this, set the appropriate handles data member to the already-
        opened filehandle, and then set the option direct to be true for that handle, as
        described in the "options" entry in the GnuPG::Handles manpage. For example, to
        have GnuPG read from the file input.txt and write to output.txt, the following
        snippet may do:

          my $infile  = IO::File->new( 'input.txt.' );
          my $outfile = IO::File->new( 'output.txt' );
          my $handles = GnuPG::Handles->new( stdin  => $infile,
                                             stdout => $outfile,
                                           );
          $handles->options( 'stdin'  )->{direct} = 1;
          $handles->options( 'stdout' )->{direct} = 1;

        If any handle in the handles object is not defined, GnuPG's input, output, and
        standard error will be tied to the running program's standard error, standard
        output, or standard error. If the status or logger handle is not defined, this
        channel of communication is never established with GnuPG, and so this
        information is not generated and does not come into play. If the passphrase data
        member handle of the handles object is not defined, but the the passphrase data
        member handle of GnuPG::Interface object is, GnupG::Interface will handle
        passing this information into GnuPG for the user as a convience. Note that this
        will result in GnuPG::Interface storing the passphrase in memory, instead of
        having it simply 'pass-through' to GnuPG via a handle.

  Other Methods

    get_public_keys( @search_strings )
    get_secret_keys( @search_strings )
    get_public_keys_with_sigs( @search_strings )
        These methods create and return objects of the type GnuPG::PublicKey or
        GnuPG::SecretKey respectively. This is done by parsing the output of GnuPG with
        the option with-colons enabled. The objects created do or do not have signature
        information stored in them, depending if the method ends in *_sigs*; this
        separation of functionality is there because of performance hits when listing
        information with signatures.

    test_default_key_passphrase()
        This method will return a true or false value, depending on whether GnupG
        reports a good passphrase was entered while signing a short message using the
        values of the passphrase data member, and the default key specified in the
        options data member.

Invoking GnuPG with a custom call
    GnuPG::Interface attempts to cover a lot of the commands of GnuPG that one would
    want to perform; however, there may be a lot more calls that GnuPG is and will be
    capable of, so a generic command interface is provided, `wrap_call'.

    wrap_call( %args )
        Call GnuPG with a custom command. The %args hash must contain at least the
        following keys:

    commands
            The value of this key in the hash must be a reference to a a list of
            commands for GnuPG, such as `[ qw( --encrypt --sign ) ]'.

    handles As with most other GnuPG::Interface methods, handles must be a GnuPG::Handles
            object.

        The following keys are optional.

    command_args
            As with other GnuPG::Interface methods, the value in hash for this key must
            be a reference to a list of arguments to be passed to the GnuPG command,
            such as which keys to list in a key-listing.

OBJECT DATA MEMBERS
    Note that these data members are interacted with via object methods created using
    the methods described in the section on "get_set" in the Class::MethodMaker manpage,
    or the section on "object" in the Class::MethodMaker manpage. Please read there for
    more information.

    call
        This defines the call made to invoke GnuPG. Defaults to 'gpg'; this should be
        changed if 'gpg' is not in your path, or there is a different name for the
        binary on your system.

    passphrase
        In order to lessen the burden of using handles by the user of this package,
        setting this option to one's passphrase for a secret key will allow the package
        to enter the passphrase via a handle to GnuPG by itself instead of leaving this
        to the user. See also the "passphrase" entry in the GnuPG::Handles manpage.

    options
        This data member, of the type GnuPG::Options; the setting stored in this data
        member are used to determine the options used when calling GnuPG via *any* of
        the object methods described in this package. See the GnuPG::Options manpage for
        more information.

EXAMPLES
    The following setup can be done before any of the following examples:

      use IO::Handle;
      use GnupG::Interface;

      my @original_plaintext = ( "How do you doo?" );
      my $passphrsae = "Three Little Pigs";

      my $gnupg = GnupG::Interface->new();

      $gnupg->options->hash_init( armor    => 1,
                                  recipients => [ 'ftobin@uiuc.edu',
                                                  '0xABCD1234' ],
                                  meta_interactive( 0 ),
                                );

  Encrypting

      # We'll let the standard error of GnuPG pass through
      # to our own standard error, by not creating
      # a stderr-part of the $handles object.
      my ( $input, $output ) = ( IO::Handle->new(),
                                 IO::Handle->new() );

      my $handles = GnupG::Handles->new( stdin    => $input,
                                         stdout   => $output );
       
      # this sets up the communication
      # Note that the recipients were specified earlier
      # in the 'options' data member of the $gnupg object.
      my $pid = $gnupg->encrypt( handles => $handles );

      # this passes in the plaintext
      print $input @original_plaintext;

      # this closes the communication channel,
      # indicating we are done
      close $input;

      my @ciphertext = <$output>;  # reading the output

      waitpid $pid, 0;  # clean up the finished GnuPG process

  Signing

      # This time we'll catch the standard error for our perusing
      my ( $input, $output, $error ) = ( IO::Handle->new(),
                                         IO::Handle->new(),
                                         IO::Handle->new(),
                                       );

      my $handles = GnupG::Handles->new( stdin    => $input,
                                         stdout   => $output,
                                         stderr   => $error,
                                       );

      # indicate our pasphrase through the
      # convience method
      $gnupg->passphrase( $passphrase );

      # this sets up the communication
      my $pid = $gnupg->sign( handles => $handles );

      # this passes in the plaintext
      print $input @original_plaintext;

      # this closes the communication channel,
      # indicating we are done
      close $input;

      my @ciphertext   = <$output>;  # reading the output
      my @error_output = <$error>;   # reading the error

      close $output;
      close $error;

      waitpid $pid, 0;  # clean up the finished GnuPG process

  Decryption

      # This time we'll catch the standard error for our perusing
      # as well as passing in the passphrase manually
      # as well as the status information given by GnuPG
      my ( $input, $output, $error, $passphrase_fh, $status_fh )
        = ( IO::Handle->new(),
            IO::Handle->new(),
            IO::Handle->new(),
            IO::Handle->new(),
            IO::Handle->new(),
          );

      my $handles = GnupG::Handles->new( stdin      => $input,
                                         stdout     => $output,
                                         stderr     => $error,
                                         passphrase => $passphrase_fh,
                                         status     => $status_fh,
                                       );

      # this time we'll also demonstrate decrypting
      # a file written to disk
      # Make sure you "use IO::File" if you use this module!
      my $cipher_file = IO::File->new( 'encrypted.gpg' );
       
      # this sets up the communication
      my $pid = $gnupg->decrypt( handles => $handles );

      # This passes in the passphrase
      print $passphrase_fd $passphrase;
      close $passphrase_fd;

      # this passes in the plaintext
      print $input $_ while <$cipher_file>

      # this closes the communication channel,
      # indicating we are done
      close $input;
      close $cipher_file;

      my @plaintext    = <$output>;   # reading the output
      my @error_output = <$error>;    # reading the error
      my @status_info  = <$status_fh> # read the status info

      # clean up...
      close $output;
      close $error;
      close $status_fh;

      waitpid $pid, 0;  # clean up the finished GnuPG process

  Printing Keys

      # This time we'll just let GnuPG print to our own output
      # and read from our input, because no input is needed!
      my $handles = GnuPG::Handles->new();
      
      my @ids = [ 'ftobin', '0xABCD1234' ];

      # this time we need to specify something for
      # command_args because --list-public-keys takes
      # search ids as arguments
      my $pid = $gnupg->list_public_keys( handles      => $handles,
                                          command_args => [ @ids ]  );
      
       waitpid $pid, 0;

  Creating GnuPG::PublicKey Objects

      my @ids = [ 'ftobin', '0xABCD1234' ];

      my @keys = $gnupg->get_public_keys( @ids );

      # no wait is required this time; it's handled internally
      # since the entire call is encapsulated

FAQ
    How do I get GnuPG::Interface to read/write directly from
    a filehandle?
        You need to set GnuPG::Handles direct option to be true for the filehandles in
        concern. See the "options" entry in the GnuPG::Handles manpage and the section
        on "Object Methods which use a GnuPG::Handles Object" for more information.

    Why do you make it so difficult to get GnuPG to write/read
    from a filehandle?  In the shell, I can just call GnuPG
    with the --outfile option!
        There are lots of issues when trying to tell GnuPG to read/write directly from a
        file, such as if the file isn't there, or there is a file, and you want to write
        over it! What do you want to happen then? Having the user of this module handle
        these questions beforehand by opening up filehandles to GnuPG lets the user know
        fully what is going to happen in these circumstances, and makes the module less
        error-prone.

    When having GnuPG process a large message, sometimes it just
    hanges there.
        Your problem may be due to buffering issues; when GnuPG reads/writes to non-
        direct filehandles (those that are sent to filehandles which you read to from
        into memory, not that those access the disk), buffering issues can mess things
        up. I recommend looking into the "options" entry in the GnuPG::Handles manpage.

NOTES
    This package is the successor to PGP::GPG::MessageProcessor, which I found to be too
    inextensible to carry on further. A total redesign was needed, and this is the
    resulting work.

    After any call to a GnuPG-command method of GnuPG::Interface in which one passes in
    the handles, one should all wait to clean up GnuPG from the process table.

BUGS
    Currently there are problems when transmitting large quantities of information over
    handles; I'm guessing this is due to buffering issues. This bug does not seem
    specific to this package; IPC::Open3 also appears affected.

    I don't know yet how well this modules handles parsing OpenPGP v3 keys.

SEE ALSO
    the GnuPG::Options manpage, the GnuPG::Handles manpage, the GnuPG::PublicKey
    manpage, the GnuPG::SecretKey manpage, the gpg manpage, the Class::MethodMaker
    manpage, the section on "Bidirectional Communication with Another Process" in the
    perlipc manpage

AUTHOR
    Frank J. Tobin, ftobin@uiuc.edu

PACKAGE UPDATES
    Package updates may be found on http://GnuPG-Interface.sourceforge.net/ or CPAN,
    http://www.cpan.org/.